sendo Posted January 18, 2021 Share Posted January 18, 2021 how are these fasten to the car, screws or plastic plug? https://www.ebay.com/itm/1970-72-Chevrolet-Monte-Carlo-Rear-Bumper-to-Side-Seals-Pair/352772481719?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 Quote Link to comment Share on other sites More sharing options...
Rob Peters Posted January 18, 2021 Share Posted January 18, 2021 Screws, if I am not mistaken it used 3 screws Rob Quote Link to comment Share on other sites More sharing options...
MC1of80 Posted January 18, 2021 Share Posted January 18, 2021 X2 to what Rob said. Screws normally. I had to use something a little bigger due to someone installing "big screws" in the old replaced ones and making the holes in the cast end cap bigger than needed. They were used on 70 and early 71s. I feel all first gens should have them. 2 Quote Link to comment Share on other sites More sharing options...
overdrive Posted January 19, 2021 Share Posted January 19, 2021 The originals were hex head screws. Dan 1 Quote Link to comment Share on other sites More sharing options...
MC1of80 Posted January 19, 2021 Share Posted January 19, 2021 I stand corrected. Thanks Dan. I said screws because I removed 3 monster screws on each side when I changed mine. The hex ones I installed are larger than the originals due to that reason. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.