dirtyj Posted February 6, 2012 Share Posted February 6, 2012 can anyone tell me how the heck the heat stove is attached to the pass. side exhaust manifold. Quote Link to comment Share on other sites More sharing options...
cny first gen 71 Posted February 6, 2012 Share Posted February 6, 2012 I just looked at mine (or whats left of it) they appear to be rivets Quote Link to comment Share on other sites More sharing options...
bigtankjones Posted February 6, 2012 Share Posted February 6, 2012 I to, recall seeing rivets on the right manifold when I removed my small block. Quote Link to comment Share on other sites More sharing options...
LS5 Posted February 6, 2012 Share Posted February 6, 2012 Hey Jason, the boys are right they are Rivets and they are machine pressed on.. Darren. Quote Link to comment Share on other sites More sharing options...
stangeba Posted February 6, 2012 Share Posted February 6, 2012 Yep, rivets. I bought two extra from thew Chevy dealer 20+ years ago in-case I lost one or two. Just tapped them in with a hammer. One of the two shield parts, was a slightly different shape, but it's all they had, back then. Stock 71 350 exhaust manifolds Quote Link to comment Share on other sites More sharing options...
dirtyj Posted February 6, 2012 Author Share Posted February 6, 2012 oh boy.....can anyone send me a good pic. all the manifolds i have around here have 3 nub like raised areas. 4 sets and none have the stove still on them.... i bet those were the rivets then. any suggestions how to put on new one? Quote Link to comment Share on other sites More sharing options...
cny first gen 71 Posted February 7, 2012 Share Posted February 7, 2012 Duct tape just kidding. I took mine off when I changed the carb and air cleaner and havent noticed a problem unless your going for 100% stock look. Quote Link to comment Share on other sites More sharing options...
dirtyj Posted February 8, 2012 Author Share Posted February 8, 2012 going for the stock look on mamas red 70. or atleast stock under the hood. Quote Link to comment Share on other sites More sharing options...
Monte7071 Posted February 9, 2012 Share Posted February 9, 2012 They have them here Quote Link to comment Share on other sites More sharing options...
cny first gen 71 Posted February 9, 2012 Share Posted February 9, 2012 I have the tube that goes up to the air cleaner and air cleaner 350 2 barrel if you need it. Quote Link to comment Share on other sites More sharing options...
dirtyj Posted February 11, 2012 Author Share Posted February 11, 2012 i have new stove and pipe i just need to mount it some how Quote Link to comment Share on other sites More sharing options...
stangeba Posted February 13, 2012 Share Posted February 13, 2012 I found this, hope it helps. Heat Stove drawing small block Chevy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.