lastss

use Popsicle sticks, worked for me or clothes pins wood of course.

Hagerty insured my ss for 45K no appraisal.bob PS that was 14 yrs ago & still the same today.

Great send me a picture. I have an old racing tire from Richard petty driving school you can have, Just pay shipping, Have glass top made. Bob

I have a some spare parts & 1 on eBay & 1 spare not for sale in case something happens to mine. Both work

OH ya & the rear mount is missing the rubber mount Ares requires, Yet another Cadillac issue.

Yes it is. Look at location of air line hook-up.. It's 180 degrees out. Was set up for a Cadillac, Not an SS. Are air line output fitting goes out the front of the pump. You need to take out the 2 bolts holding the regulator in place turn it 180 degrees & re-install the bolts. No Big deal. but see a over the gm counter was cad plated & set up for the Cadillac Not the SS.

Hi Dan, Did anyone ever check the date code on the front pump section, I have had a ton of experience with these as most know. I have seen some of them also & they did have situations were they were covered under warranty & replaced & even had one were the date code was over stamped with 3 letter XS (XXX) a factory repaired unit ??? who knows. Also had 1 owner tell me his was original, but that was an early dated unit cad plated bullet end from a Cadillac. All SS had the tank end unit that looks like a cap on the end. The cap on the end was first used on Cadillac's has in late 60S the compressors were mounted Vertical next to the radiator & because of condensation would rust out the bullet end & GM added the cap to prevent that. All warranty & over the gm parts counter unit's were cad plated units. Best to check the date code to see if it's original to the SS. Send me a PM Dan I need to buy a new filter from you my got messed up on a repair job to exhaust manifold gasket. Hope this helps.

PS that Just the tank. Pump is natural aluminum. bolts were yellow cad or zinc & yellow cap on regulator. Awesome repop filter from Dan. Also mounting nuts are the ones with star washers on them.

Ditto.semi gloss black

Brue, Your look awesome also & I assume they are holding up just fine?. Ill be sending out my front one in fall. I'm wondering how long before EPA or some agency puts a halt to company's like this, Like what they did to real cad plating, which was a process using potassium cyanide & dangerous. a few company's can still do it, But only for the military I am told?.

Just received a true ss bumper I purchased on ebay all bent split extra holes drilled for trailer hitch back from Tri-city plating in TN owner Mr. Potter, ABSOLUTLY FLAWLESS show condition $375 plus shipping. Please note pay no mind to what looks like a flaw or grain in restored bumper pictures it from me rubbing my hands over it. Note area below lic bracket were their was 4 holes now repaired & done perfect. Happy Happy Happy.

Push in from wheel side the axles & you should be able to remove the clips.

No need to tape off plate, They are what's referred as Rapid Fire bulbs & that's Normal enjoy. Did you install with stock lens gasket??

Tri City Plating, Mr Potter 423-542-6532 Tell him Bob Lyman From Hot Rod Hotline sent you.

Closest I found to GM 10% gloss is called Hot Rod Black.

I think at bottom right, Click on more reply options & then bottom left click browse & attach from your computer or just right click address then copy then in post right click paste & put in post.

heat stove on exhaust manifold was never painted from factory was natural tin but most inc me painted with high heat paint to preserve it. tube was black locks were natural tin also stainless steel paint works for me.

You want the seat bracket metal to metal, I cut the carpet as a flap so the carpet flap is in front of the bracket then it hides somewhat the floor bracket.. As far as the front you can judge by the carpet protectors.

Awesome, Scan us some shots. Bob

Monster Transmissions complete set up to my 454 went extra on there syn oil used stock cross member , had new driveshaft made. Get people & posted build on faccebook about 1k complete driveshaft made at different company $300.

OK maybe do a hand stand LOL I don't know I have Dumb A** phone LOL

Yes spare was a rally rim code YH for rally rim CI 15x7 standard steel rim.

Maybe GM customer service can tell you?? I have an 88 monte ss got a letter from GM built last day of production in Pontiac mich 12/07/87 one of 297 radio delete option of all G bodies made for yr 1988. has 23k original miles. Bob

That # 329225 is the same except smog tube. Must be your pipe.

RH 3989310 LH 3989343 I have a set I can sell but only a set wont split up lastss@hotmail.com