Jump to content

1970mcss

Members
 View Profile  See their activity

  • Posts

    1,672

  • Joined

  • Last visited

  • Days Won

    20

 Content Type 

Everything posted by 1970mcss

  1. 1970mcss
    Yes the decal is missing on the car. My build sheet is at my office so I will double check that box in the morning. When I find the code I just call Jack the decal guy and give him the codes and he can look up the correct decals?
  2. 1970mcss
    Darren, that is very helpful. I checked my built sheet and the code for the air cleaner is CN and the engine tune label is AW. I don't see a box on the build sheet that has emission label on it. I need to check the car because it may have the wrong label on the core support. Willie are these codes all I have to give Jack???
  3. 1970mcss
    Darren, do you know where a guy can find the correct replacement labels?
  4. 1970mcss
    I would check the timing , when I bought mine the timing was off a little. If you don't have a timing light you could try to advance vance the timing to see if the car runs any better. A timing light would be a cheap investment if you don't have one. I thought it was an idle adjustment. I got it close and then had a shop fine tune it.
  5. 1970mcss
    I checked the part catalog and it looks like the shifter cable for all 68-72 Chevelle used the same shifter cable.
  6. 1970mcss
    Willie, the parts book show the cleaners and filters were the same for all three years
  7. 1970mcss
    Looks great, I need to replace my headliner, I'm not sure if I have the guts to do it myself. Where did you buy yours??
  8. 1970mcss
    I think off an 80's Skylark. I used to work for a Buick Dealership. Maybe a little heat gun or hair dryer to loosen the two sided tape.
  9. 1970mcss
    Does the speedo spin? You should be able to remove the cable and spin the speedo by hand to see if the needle moves. I would go ahead and try the new cable you have. I hope that helps..good luck.
  10. 1970mcss
    I don't see anything......
  11. 1970mcss

    Bad short

    1970mcss replied to willie's topic in Electrical Tech

    I had kind of forgot that mine had smaller magnets until I looked at the website. I'm not sure if there was some adjustment for the factory speakers. Maybe someone else will chime in.
  12. 1970mcss
    I bought a complete retainer kit from the parts place and they were included and fit perfect
  13. 1970mcss
    Looks like a cool place for a car show. Thanks for sharing.
  14. 1970mcss

    Bad short

    1970mcss replied to willie's topic in Electrical Tech

    Willie, I bought my replacements from Classic car Speakers http://www.turnswitch.com/speakers.htm . They use a smaller magnet as you can see in the pictures and I believe they also sent the little brackets for the mounting bracket. I think when I mounted them they stick up a bit but the cover did fit. They aren't cheap but they sound original so to speak. Take a look.
  15. 1970mcss

    Bad short

    1970mcss replied to willie's topic in Electrical Tech

    Willie, I got a pair of speakers with the original size magnets but I can't remember from who. I think I mounted the left speaker and lifted or bent the mounting brackets up slightly so it clears. So the speaker angles up but the dash pad still fits properly. If that makes sense.
  16. 1970mcss
    Looks like a beautiful area, have a good and safe weekend!
  17. 1970mcss
    Looking good!
  18. 1970mcss
    The proportion valve is mounted on the frame.
  19. 1970mcss
    Pictures please!!!!
  20. 1970mcss
    Great looking cars, looks like a great show. Thanks for sharing...
  21. 1970mcss
    Check out the electrical section. Rob posted a stickey post that shows all of the diagrams...good luck....
  22. 1970mcss
    I'll take a look, thanks
  23. 1970mcss
    So I'm still in search of a picture of the original 1970 454 picture. I haven't heard from Leo. I'm not in a big hurry because the car runs ok but I would still like to put it back to stock. Thanks Larry
  24. 1970mcss
    Thanks guys, the 72 may be different. The diagram looks different than the one I have but looks like the 402 bracket but the connector and wires on the solenoid looks different. My connector at the firewall is a single black wire with a purple stripe. I guess my hope is that Leo has the correct set up from a 70 BB. I'll let you all know, thanks again.
  25. 1970mcss
    No rush, I will wait for Leo, hoping he has the bracket included. Thanks
×
×
  • Create New...