Nate Posted July 11, 2008 Share Posted July 11, 2008 Any know Axel sizes or will 28 spline. 30" shaft length. 1.780" pilot size fit in my Monte these are out of a From a first generation Camaro Thanks Nate Quote Link to comment Share on other sites More sharing options...
Heckeng Posted July 11, 2008 Share Posted July 11, 2008 I can say that those won't work for a 12 bolt rear end as the 12 bolts use 30 spline axles. I'm not sure about 10 bolts though. Also, it may depend if it is a Chevy or BOP rear end, I don't know. Quote Link to comment Share on other sites More sharing options...
dbreese Posted July 12, 2008 Share Posted July 12, 2008 Nate A 10 bolt 28 spline axle should measure 30 1/16" for the Monte. First gen Camaro are 29 1/2 " with a 28 spline for the 10 bolt. I think they might be a little short. David Quote Link to comment Share on other sites More sharing options...
Nate Posted July 14, 2008 Author Share Posted July 14, 2008 Yes I have a 10 bolt the axels are 28 spline. 30" shaft length. 1.780" pilot size so I should be good then right? I will be running C clip eliminator aswell Quote Link to comment Share on other sites More sharing options...
Nate Posted July 14, 2008 Author Share Posted July 14, 2008 Oh ya this what I got for being cheap and not getting axels sooner broke the wheel right off on the street at that! Quote Link to comment Share on other sites More sharing options...
Ian Posted July 14, 2008 Share Posted July 14, 2008 Nate when did that happen? That sucks! Ian Quote Link to comment Share on other sites More sharing options...
7tonemonte Posted July 14, 2008 Share Posted July 14, 2008 Oh my That really sucks!! So sorry to see that Nate, my heart goes out to you Quote Link to comment Share on other sites More sharing options...
Phil Posted July 14, 2008 Share Posted July 14, 2008 Dude that's ugly. Good luck. Quote Link to comment Share on other sites More sharing options...
Heckeng Posted July 14, 2008 Share Posted July 14, 2008 Man, you must have some good power and it must hook up well! Sorry about the body work! Quote Link to comment Share on other sites More sharing options...
Sam (Bones) Posted July 14, 2008 Share Posted July 14, 2008 OUCH!!!! Quote Link to comment Share on other sites More sharing options...
dbreese Posted July 14, 2008 Share Posted July 14, 2008 WOW!!! Nate your ride must be making some BIG hp and torque. IMHO I would go with aftermarket axles and maybe jump up to a 12 bolt with Ford ends. Sorry about your mishap!!! David Quote Link to comment Share on other sites More sharing options...
Nate Posted July 14, 2008 Author Share Posted July 14, 2008 New quarter lol yes it's all in the works I have been itching to do some paint work so now I have too I just pickedup some new paint guns and a DA. I kinda want to paint it like Heckeng car with a twist still want to see more pictures of his car. So Heckeng get me some photo's lol! I am going to run Strange Axles with my mini spool in it they come in tomorrow should hold me over for now. I def need a 4 link under it to. Quote Link to comment Share on other sites More sharing options...
TN454Monte Posted July 15, 2008 Share Posted July 15, 2008 OW! Sorry for the problems Nate...gotta give yourself some props tho, that's gotta be one heck of a engine build to do that...LOL. Quote Link to comment Share on other sites More sharing options...
502ci Posted July 15, 2008 Share Posted July 15, 2008 Truly is ugly... You don't seem to mind too much so I guess it's all right. Bill Quote Link to comment Share on other sites More sharing options...
Heckeng Posted July 15, 2008 Share Posted July 15, 2008 New quarter lol yes it's all in the works I have been itching to do some paint work so now I have too I just pickedup some new paint guns and a DA. I kinda want to paint it like Heckeng car with a twist still want to see more pictures of his car. So Heckeng get me some photo's lol! Woops! I completely forgot! Sorry Nate, I'll get on that though now that you have to do some bodywork! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.