Monte7071
-
Posts
270 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Gallery
Events
Everything posted by Monte7071
-
Thank you for taking the time to take referense pics. We should have an area showing the changes between BB and SB and a/c not a/c cars and any other differences.
-
Congrats Dave. Keep it up.
-
Im not able to watch the video at work but I agree with Sam the hydraulic ones are awesome.
-
This might help link It should be partial vin you may be looking at the date stamp.
-
I would suggest beer after the rebuild lol.
-
If you rebuild it make sure you or someone else puts new bushings in it. http://www.cliffshighperformance.com/bushings.html#
-
Davey your a better man than I no way I could have kept my cool. Glad to hear you had fun the trailer tried to put you over the edge you think it and the velle have something going lol.
-
What did you do to your Monte today?
Monte7071 replied to Xxyyzz's topic in General 70-72 Monte Carlo Forum
Cleaned up the garage around it now I have to build a shed so I can use the garage to finish disassembly. i'm bound and determined to get the body off the frame by the fall. Lots of housework to do first and I thought I would get a break after moving. -
Looks good and sounds even better.
-
Looking good I would rather have blue walls than.
-
Thoughts and prayers for his family and friends.
-
Looking good it looks like you are putting your new garage to use.
-
That black looks sweet. As for the ottoman it needs some rallys.
-
-
Glad to see everything is going good after the swap. Hope you get the carb worked out.
-
Exact placement of engine, door, and trunk decals
Monte7071 replied to cpmman's topic in Restorers - Archive
Sam I found two web sites that offer the decals and say where to put them. decal decal 2 -
The parts place has them mount I got mine from a Grand Prix restoration sight but I cannot remember the name. Andreas beat me
-
-
I have a book at home called chevrolet by the numbers but I use this site alot. trim codes Pick the year you are looking for.
-
Here is some good info about starters for 400sbc I know its not what you are talking about but still good info. LINK
-
How is the bolt pattern on your starter and how do your valve covers bolt on. You probably have a early sb or a late model the starter they were going to give you is very common. You can either try to find someone who will help you by pulling several years or get the casting number off the back of the block on the driver side.
-
Count the nuber of teeth on the ring and on the pinion divide the number on the ring by the pinion. Say you have 37 on the ring and 9 on the pinion that would be a 4.11.
-
I would like to find a build sheet for mine.