robs70monte Posted April 3, 2011 Author Share Posted April 3, 2011 Sweet next on my list is gauges nothing fancy jest 3 for under the dash water temp amps and oil pressure Quote Link to comment Share on other sites More sharing options...
DRDIRT11 Posted April 4, 2011 Share Posted April 4, 2011 i got a set 4 sale Quote Link to comment Share on other sites More sharing options...
Riznitch Posted April 5, 2011 Share Posted April 5, 2011 I can see rob starting to cut that dash.  Oh geesh! oh god! can't believe i'm doing this  Looks good though, nice install. Quote Link to comment Share on other sites More sharing options...
robs70monte Posted April 5, 2011 Author Share Posted April 5, 2011 You said it,you have to keep the cut off wheel speed down all most thought I messed up a few times came out ok Quote Link to comment Share on other sites More sharing options...
JAWSS Posted April 17, 2011 Share Posted April 17, 2011 If you must, use a dremel and make a cardboard template by tracing the sleeves smaller portion. I would go with a retro sound deck with a changer and MP3 jack in the front if my dash wasnt already cut. Â http://www.retrosoundusa.com/products/details/id/109 Quote Link to comment Share on other sites More sharing options...
robs70monte Posted April 18, 2011 Author Share Posted April 18, 2011 I had all the stuff to put that deck in any way pulled it out of our old plow truck can't beat free Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted April 18, 2011 Share Posted April 18, 2011 Not a bad job there, hard to beat good tunes. Â It looks good, and not done sloppy, I'm seen some sloppy dash cutting before.... Â Â Quote Link to comment Share on other sites More sharing options...
bigscaht Posted April 18, 2011 Share Posted April 18, 2011 nice job..gotta have the music in the car..... Quote Link to comment Share on other sites More sharing options...
70mcarlo Posted April 18, 2011 Share Posted April 18, 2011 Nice install - looks great! Quote Link to comment Share on other sites More sharing options...
robs70monte Posted April 19, 2011 Author Share Posted April 19, 2011 Ya the truck it came out of had this jb weld or some other kinda of glue around it looked like the smashed the hole out with a hammer and glued the radio in people now a days if you cant do it right don't do it at all Quote Link to comment Share on other sites More sharing options...
black07ss Posted April 19, 2011 Share Posted April 19, 2011 Don't knock JB Weld I keep it right next to my duct tape Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.