Blueheeler Posted April 20, 2022 Share Posted April 20, 2022 I'm currently not happy with my Edelbrock carb. Rather the rebuild it I'm considering going back to Rochester or Carter 4BB. I still have the factory intake on the car with original throttle & kick down linkage. The choke coil assembly on the intake has been trashed & I know I'd need to replace that. What else might I need please. Quote Link to comment Share on other sites More sharing options...
1970mcss Posted April 20, 2022 Share Posted April 20, 2022 I think you can order the choke coil from the parts place. Then I think just a carb and base gasket, air cleaner. Quote Link to comment Share on other sites More sharing options...
Dtret Posted April 20, 2022 Share Posted April 20, 2022 As stated above and possibly vacuum hose for the original style air cleaner, check your brake booster hose, I would assume a fuel line from the pump to the carb, preheat hose, valve cover to air cleaner hose. I think that’s most of it. Quote Link to comment Share on other sites More sharing options...
stangeba Posted April 20, 2022 Share Posted April 20, 2022 Here is my 71 350. I added an extra snorkel on the left (driver) side since I don't have A/C. I removed the TSC system. I added Cruise Control. 1 Quote Link to comment Share on other sites More sharing options...
Blueheeler Posted April 21, 2022 Author Share Posted April 21, 2022 I'm impressed with the double snorkel you added. That's one of the reasons I'm considering changing carbs. The double snorkel air cleaner I have won't fit on my Edelbrock since I added an electric choke. 1 Quote Link to comment Share on other sites More sharing options...
1970mcss Posted April 21, 2022 Share Posted April 21, 2022 I thought I saw somewhere that you can buy a 1" spacer for the air cleaner. Maybe someone can chime in Quote Link to comment Share on other sites More sharing options...
cny first gen 71 Posted April 21, 2022 Share Posted April 21, 2022 49 minutes ago, 1970mcss said: I thought I saw somewhere that you can buy a 1" spacer for the air cleaner. Maybe someone can chime in Pretty sure I saw that somewhere too but don't remember where. Quote Link to comment Share on other sites More sharing options...
Canuck Posted April 21, 2022 Share Posted April 21, 2022 A spacer would do the trick to fit the air cleaner on the existing carb. My local parts store had a few different heights to choose from. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.