Searsman

Pretty car !

Nice ,but too rich for my blood.. I’m not so sure someone didn’t know much about Monte Carlos - SS.

Hi HVAC tech, bet yer a busy guy this time of year.. Been doin a little work on my Tempstar myself... anyway. I’m no expert on specs of cylinder boring on 454 but I think 🤔 it should be about 60 thousands max... I’m sure someone with a lot more expertise will answer correctly...

Sure looks inviting down there, may visit again someday.. a little warmer here today made a big difference along with sunshine all day... yes I know how to fix it thankfully . Still have a contact for parts also but they are getting more difficult to find.. the unit is 15 years old “ young” and is considered obsolete already...due to the type of Freon it uses R22 .. luckily it doesn’t have a sealed system problem... should be able to get it going by this Wednesday.. if not I’ll need more bourbon 🥃! Glen... thanks Ron T...

Older I get the more I dislike winters. For a good reason.. it’s 16 degrees headed to single digits with ice and sleet and snow on the ground and the HVAC decides to take a break! 🥶... anyway, got parts ordered. Just another day in paradise, in the winter 🤬!...

If I can remember that far back I believe my second gen “76” had some on it as well...

So that’s what I kept running over in the road in the 70s ! 😆

First time I’ve ever seen these.. learn something every day here.. 📖

Beautiful Car!.

Welcome and have a great experience with your rebuild, you’ll find lots of the correct info on this club site...

Yal I’ve got family up in CT. They not lookin forward to this storm.. two inches snow ⛄️ here today but it’s turning north and getting worse as it goes.. stay safe up thatta way...

Doubt a new drivers seat belt would be any longer than the original, unless it’s been modified for some reason.. I would just go to eBay or someplace like that and type in “car seatbelt extender”. Maybe come up with something temporarily.. maybe another fgmcc member knows if there are different size belts that can be ordered.. also, might could make one with the correct material...

Opgi sells them listed as an upper or lower clamp.. but I don’t know what size they are.. would probably go onto back order there as mine did.

Very nice!

I tried to buy it, but the owner wouldn’t sell, wants to fix it up some day !

Thanks Dennis, received them and installed them. Like them better than I thought I would ..with no changes or splices to the wiring on the car 👍🏻...

Thanks guys, I just stole this info from you. Tried to have 71 alignment, but they just scratched their head 🤣

Found LED conversion kit in new products for Monties forum that was started by Rob a while back. Received them today and installed. Only took 3 days to get the bulb socket 3 wire kit but 2 week to receive the conversion kit.. the 3 wire plug allowed me to install the LED kit without removing bulb sockets from the taillights.. ordered both from eBay. I have part numbers and the 3 wire color code change if anyone needs or interested.. I must say, I’m very pleased with the new brighter rapid fire taillights... B9698487-8124-4DB2-9B47-1AA63968F1D4.mov

My condolences to his family, and his his close club members. Didn’t get to meet him but we had a lot in common, Monties and the Beatles. RIP Terry.

I purchased my body mount kit from OPGI. It came with the body mount hardware, but I’m not sure which brand it really was. Ron..

Picture taken right after inner fender installation. Before remounting lift compressor.

Ordered my inner fenders thru eBay from a place called timeless performance. 2 years ago. They actually have a good shine to them being not metal.. they were not too bad to install however a couple of holes were slightly off. They haven’t cracked or anything and I would definitely recommend them. Enclosing a copy of the invoice. Not too bad a price I thought. 👍🏻