cny first gen 71

How many miles on the motor and on the heads? Has it been rebuilt? Did you do compression test on it?

Maybe you can find a spring at your local hardware store. One near me has a display like this.

Oh yea the valve seals can be changed without pulling the heads but not the guides, it does require some special tools.

I have a problem with mine fouling number 1 plug also, I put a non fouler in it until I have time and space to do the motor. It's probably valve seals or guides I assume, I have new heads for it when I do it. Was going to just do heads and cam but not sure if the bottom end will hold up so just going to do it all at once. The non fouler has helped for sure with no ill effects, I do carry a tool kit and extra plugs with me at all times.

Not a bad looking car but you definitely need to wear seat belts or you'll slide right off the seats. I do like the color combo.

I have the same one here's the cover

I belive they make an ac delet plate, I saw it somewhere but don't remember where.

Oh yea that would bed bad if they had the metal rings around them, I never thought of that.

I know summit racing does have someone that's looks around at the forums to see what's being said because the guy contacted me after I put a post up about the air cleaner I bought. They made it right and it really wasn't there fault it was the manufacturer that marketed the part wrong so I'm very happy with them. Only actually bought one thing from opg but tried several times and they didn't have the stuff in stock. So I am very careful where I buy from. I always call to make sure a part is in stock.

Neutral and shut it off quickly, been there done that saves a lot of hassle.

Are the new heads the same size valves?

This is all but the rocker clips.. the auevco 8400 clips work real well on rocker molding. Think this was on ebay but may be available at other sources

I'm pretty sure when I installed mine 10 or so years ago it said to upgrade the coil from stock to high output, I got an accel coil for mine. I don't remember the specs but for some reason 40 k is In my head but could be wrong. I haven't had a problem with it since installed.

Seems as though I heard they were ok but it is plastic. I guess if someone in a real jam that needs a grill it would be alright but I'd prefer oe myself.

Dennis had a meeting today, the big banana showed up

I could be interested too but we'll have to see. I tried to sync it up when we took our trip out west a few years ago but it didn't work out. We'll see as it gets closer.

That setup looks a little strange to me, the down shift cable don't look right. I'd have to get down to garage to look at mine I'll try tomorrow but right now not moving g so well.

Mine does the exact same thing Bruce I guess it's normal.

That's ok Dennis I live in a state of confusion you get used to it after a while 🤪

And probably still won't 😅 we stay right on the grounds from Wednesday thru Sunday and many times will ride around in the evening until we get kicked out lol (guess your not supposed to) still to much to see. Last year I rode around on my scooter in the evening too they didn't seem to mind that. But there's still so much to see and hear (bands in the evenings too) but sure is fun.

Doing the inside of stuff and underside of stuff is a real pain but has to be done for sure. Been there done that. Looks great can't wait to see it in color.

Very nice!

Don't worry Dennis we'll make more

I'll hug Suzie not you 😅

Having a PBR in a red solo cup tonight in honor of Toby maybe. More than one