dbreese Posted September 4, 2010 Author Share Posted September 4, 2010 Ok ya'll. Had to reschedule my dyno time. Instead of Monday it will be Tuesday the 14th. Should have it up and running around 5:00 pm. I'll post the results and vids the next day. Sorry for making ya'll wait. Keep the guesses coming! David Quote Link to comment Share on other sites More sharing options...
CrazyDavey Posted September 4, 2010 Share Posted September 4, 2010 good, now you have time to find that extra 100hp... Quote Link to comment Share on other sites More sharing options...
Andy's Auto Posted September 4, 2010 Share Posted September 4, 2010 Small block, eh? I'll go 355 hp and 395 torque. Prove me wrong both you damnn Daveys. Andy Quote Link to comment Share on other sites More sharing options...
dbreese Posted September 4, 2010 Author Share Posted September 4, 2010 Small block, eh? I'll go 355 hp and 395 torque. Prove me wrong both you damnn Daveys. Andy Now dats a funny post Andy!! I'll try to make the s/b crowd proud. Thanks for posting, David Quote Link to comment Share on other sites More sharing options...
CrazyDavey Posted September 4, 2010 Share Posted September 4, 2010 okay Dave..we've been challenged..I guess it's time to send you the secret stuff......I guess these guys don't know Sears is doing hi performance motors now.... Quote Link to comment Share on other sites More sharing options...
dbreese Posted September 5, 2010 Author Share Posted September 5, 2010 okay Dave..we've been challenged..I guess it's time to send you the secret stuff......I guess these guys don't know Sears is doing hi performance motors now.... Quote Link to comment Share on other sites More sharing options...
Andy's Auto Posted September 5, 2010 Share Posted September 5, 2010 Originally Posted By: Andy's Auto Small block, eh? I'll go 355 hp and 395 torque. Prove me wrong both you damnn Daveys. Andy Now dats a funny post Andy!! I'll try to make the s/b crowd proud. Thanks for posting, David Sane Smallblock Davey, I actually love the cam you choice. As long as the convertor matches as it should you should have a very low 11 second car. I watched Winston Wolfs build and was truly impressed. The only 11 second Monte I have is my 71 and that needs a 175 shot to get there. Truly a mild 496 but I left a TON on the table with that one. But the air is cold and the brakes are awesome without a can. Quote Link to comment Share on other sites More sharing options...
dbreese Posted September 5, 2010 Author Share Posted September 5, 2010 Hey Andy, That is one of the reasons I'm putting it on the dyno so I can get hp/tq curves to send to the guys at Coan Converters. In speaking with Craig @ Coan he said that they can get the conveter restall spot on with the dyno results. Oh yea as far as being sane.....some would debate that!!! Take care, David Quote Link to comment Share on other sites More sharing options...
dbreese Posted September 8, 2010 Author Share Posted September 8, 2010 Ok ya'll. Had to reschedule my dyno time. Instead of Monday it will be Tuesday the 14th. Should have it up and running around 5:00 pm. I'll post the results and vids the next day. Sorry for making ya'll wait. Keep the guesses coming! David Ok.... pushed back one more day to Wed the 15th. I have a case that I have to present to a federal grand jury on the 14th. Sex offender that we are prosecuting under the Adam Walsh Act. Sorry guys! David Quote Link to comment Share on other sites More sharing options...
502ci Posted September 8, 2010 Share Posted September 8, 2010 You are saying a sex offender case is more important than a day at the dyno??? Just kidding , do what you gotta do... Quote Link to comment Share on other sites More sharing options...
Chevyss Posted September 8, 2010 Share Posted September 8, 2010 Bill Quote Link to comment Share on other sites More sharing options...
CrazyDavey Posted September 8, 2010 Share Posted September 8, 2010 put the scumbag in jail and get back to the shop!!! Quote Link to comment Share on other sites More sharing options...
Mike 57 Posted September 8, 2010 Share Posted September 8, 2010 big time jail Quote Link to comment Share on other sites More sharing options...
Sam (Bones) Posted September 8, 2010 Share Posted September 8, 2010 Quote Link to comment Share on other sites More sharing options...
70mcarlo Posted September 12, 2010 Share Posted September 12, 2010 I guess I'll play since there is still time. 520hp, 460tq Quote Link to comment Share on other sites More sharing options...
Heckeng Posted September 16, 2010 Share Posted September 16, 2010 Drum rolls everybody. . . . I think tonight is the night, or at least I hope it is! Dave, don't give up until you hit my mark! Quote Link to comment Share on other sites More sharing options...
72MC Posted September 16, 2010 Share Posted September 16, 2010 I tried calling him at 7:30 for some insider info and he sounded very busy. I was turned away. Rejected, aaahhhhhhhh. - Dave Quote Link to comment Share on other sites More sharing options...
dbreese Posted September 16, 2010 Author Share Posted September 16, 2010 Ok it is late and I'm exhausted. The winner is.............................................................................................................................................................................................................................. Mike 57!!!! His guess was closest to the number the mouse made. Mikes guess was 576 hp. Well the mill cranked out a peak 574.1 hp at 6500 rpm As a side note peak tq was 520.8 at 5100 rpm The cool thing was that avg tq from the best pull 4500 to 6700 was 503 ft/bs. I'll have to scan and post the number sheets tomorrow as well as post up the video. Congrats to Mike and thanks to all who played. David Quote Link to comment Share on other sites More sharing options...
70mcarlo Posted September 16, 2010 Share Posted September 16, 2010 576 hp 530 tq @6300 CONGRATULATIONS, Mike!!! Quote Link to comment Share on other sites More sharing options...
502ci Posted September 16, 2010 Share Posted September 16, 2010 That's awesome... I was pretty far off on the HP but was only 9.2ft lbs. off on the torrque... Quote Link to comment Share on other sites More sharing options...
72MC Posted September 16, 2010 Share Posted September 16, 2010 WooHoo. Take that all you small block haters Man, I was so close. Only 6 hp away. Awesome David, now get that car done and install that puppy. Leave it to Mike to get it right . I'm started to think all the guys are right,... you are the man . - Dave Quote Link to comment Share on other sites More sharing options...
dbreese Posted September 16, 2010 Author Share Posted September 16, 2010 Ok I was a little hazy last night when I posted the avg tq numbers for the pull. I crunched the numbers from 4500-6700(where the pull data began recording) and came up with 497.05 ft/lbs. Avg hp for the same rpm band was 527.94. This was the last and best pull. Sorry for the confusion. I'm not quite sure what the sheet means when the pull from 4500-4800 is called " Avg data in band" and came up with 503.2 ft/lbs of tq and 445.68 hp. Maybe someone who is a little more knowledgeable about dyno speak could explain. Anywho Mike is still the winner!! I have to leave now and drive my sister and her boyfriend to Atlanta to catch a flight to Alaska. I'll try to post up the dyno sheets and vids when I get back. David Quote Link to comment Share on other sites More sharing options...
Heckeng Posted September 16, 2010 Share Posted September 16, 2010 Awesome Dave! 574HP is not too shabby! I wish you could've squeezed that extra 26hp out of her though! And on top of that, you didn't have to spin it very high either, simply awesome. Now, are we going to have a "What do you think she will run" thread? Quote Link to comment Share on other sites More sharing options...
CrazyDavey Posted September 16, 2010 Share Posted September 16, 2010 awesome Dave, you pulled some great numbers just like you thought you would, on a conservative dyno too!!! wheels up..... Quote Link to comment Share on other sites More sharing options...
TommyP Posted September 17, 2010 Share Posted September 17, 2010 Wow, Great Job David. If your worried about breaking parts with all that power that you now have I would be willing to trade engines with you so that you don't have to stress about it....Just trying to help out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.