The pic of the green ss from our web site is mine. I understood the you couldn't get rear bumper guards on 71 ss & the bumper holes are elongaged to adjust the strip & were punched out before it was plated. Later Bob
It's not a GM part, But if you go to NAPA auto parts, Part# CRB-2674 you will see pic of correct configuration of tee. In from carb line down to pcv vavle out top of tee to pump. Later Bob
FYI, That's not correct, It's suppose to be 3/8 line from carb, then 3/8 line from Tee to pcv vavle then 1/4 line to air shock pump. Picture in assembly manual & I have nos tee part# Thanks Bob
Make sure you get paint for plastic, like Kyrlon has to be free of all wax etc or you will get spot were it doesn't stick/small bubbles. clean with strong thinner. warm up can first with hot water & mist it on with light coats. should come out nice. Take your time. Later Bob
Bounty dryer sheets are best to keep mice away, I use them in my Motorhome, My garage is sealed up good & never had any mice but also never have any food in there. I use Fogging oil in engine & never restart engine & stabil in tank also fesh oil change & 40 lbs of air in tires.
Hi, It's was done correct in all aspect/ date code lof/tint etc they have 1 place in Ohio, 1 in Calf it was $350, Shipping with a great custom made box, I had it shipped to a company address saved $50 shipping.
A spring in the garage door broke, Never hit the body or paint Lucky there. It had a cable through it but the contractor cable had too much slack in it allowing it to hit the glass but nothing else.. I did it myself this time so it will hold it in place away from car if it ever happens again. Very tight heavy cable.. Later Bob