GoGreen70MC Posted May 12, 2023 Share Posted May 12, 2023 Hello All, I am starting to get some leakage behind my 70’s master cylinder. Both the master cylinder and booster are original to the car and I am looking to replace both. From searching around on the forum, I have seen there are a number of good sources to find repros and rebuilt originals to match my car. My problem is I am not mechanically inclined in the slightest and I don’t feel comfortable replacing components myself that are directly related to a major driving function. Does anyone know mechanics or businesses in SE Michigan that do repair work on classic cars? Through my own searching, I have found a number of “restoration” businesses that do not seem very keen on taking on smaller jobs like this. It seems it is harder to find people that still do general maintenance on classics. Any thoughts would be appreciated. Thank you. Conrad Quote Link to comment Share on other sites More sharing options...
cbolt Posted May 12, 2023 Share Posted May 12, 2023 Best source of info like that is to go to your local cruise nights and talk to car guys. I can pretty much say for certain that someone in the group knows a place to get your car worked on. Car guys always seem to help each other out. 2 Quote Link to comment Share on other sites More sharing options...
Rob Peters Posted May 12, 2023 Share Posted May 12, 2023 very good advice there. rob 1 Quote Link to comment Share on other sites More sharing options...
cny first gen 71 Posted May 12, 2023 Share Posted May 12, 2023 Call Leo either he will be able to help or possibly point you in the right direction. Not sure how far you are from him. 2 Quote Link to comment Share on other sites More sharing options...
420ponies Posted May 12, 2023 Share Posted May 12, 2023 Leo Konink of Koninks Klassics . He is in our Parts Resource section of our website. If he can't help, he will give you a confident repair shop for your 1st Gen Monte. I know he does repairs on these. I believe he's just south of Port Huron. Went there years ago and purchased the "new" Rear bumper they were selling at the time (2005). Give him a call, well worth it. 2 Quote Link to comment Share on other sites More sharing options...
MC1of80 Posted May 12, 2023 Share Posted May 12, 2023 Send the car to me and I will be more than happy to replace them for you. Unfortunately that doesn't make sense for you to do. Wish you were closer. ☹️ 2 Quote Link to comment Share on other sites More sharing options...
jft69z Posted May 12, 2023 Share Posted May 12, 2023 13 minutes ago, MC1of80 said: Send the car to me and I will be more than happy to replace them for you. I have plenty of work for you to do, and I'm closer 😁. 2 1 Quote Link to comment Share on other sites More sharing options...
MC1of80 Posted May 12, 2023 Share Posted May 12, 2023 6 minutes ago, jft69z said: I have plenty of work for you to do, and I'm closer 😁. Bring it on down! We ain't skeered! 😂 3 1 Quote Link to comment Share on other sites More sharing options...
GoGreen70MC Posted May 12, 2023 Author Share Posted May 12, 2023 21 minutes ago, MC1of80 said: Send the car to me and I will be more than happy to replace them for you. Unfortunately that doesn't make sense for you to do. Wish you were closer. ☹️ I think it would make it out there, but roundtrip is about how much I drive it a year. 😏 Thanks for all the replies. I will definitely give Leo a call next week. Have a good weekend everyone. Conrad 3 Quote Link to comment Share on other sites More sharing options...
Royals71 Posted May 13, 2023 Share Posted May 13, 2023 23 hours ago, GoGreen70MC said: Hello All, I am starting to get some leakage behind my 70’s master cylinder. Both the master cylinder and booster are original to the car and I am looking to replace both. From searching around on the forum, I have seen there are a number of good sources to find repros and rebuilt originals to match my car. My problem is I am not mechanically inclined in the slightest and I don’t feel comfortable replacing components myself that are directly related to a major driving function. Does anyone know mechanics or businesses in SE Michigan that do repair work on classic cars? Through my own searching, I have found a number of “restoration” businesses that do not seem very keen on taking on smaller jobs like this. It seems it is harder to find people that still do general maintenance on classics. Any thoughts would be appreciated. Thank you. Conrad Where are you located in SE MI? I am in Canton and there are a few places around here. Quote Link to comment Share on other sites More sharing options...
GoGreen70MC Posted May 15, 2023 Author Share Posted May 15, 2023 @Royals71 I am only 30 miles from Canton, so not a bad drive at all for me. If you have any suggestions I would greatly appreciate it. Thanks. Conrad Quote Link to comment Share on other sites More sharing options...
NavyCPO Posted May 16, 2023 Share Posted May 16, 2023 Honestly, I'm surprised your local Chevy Dealership can't do this job for you. They still work on cars there don't they? It is a Chevrolet isn't it? Just sayin'............... I bet you could get the parts yourself and take them to the dealership and one of the mechanics there could do the job for a few hours labor. Wouldn't hurt to talk to the service manager. Unless he's a dick. Am I allowed to say that? DOH! 1 Quote Link to comment Share on other sites More sharing options...
jft69z Posted May 16, 2023 Share Posted May 16, 2023 1 hour ago, NavyCPO said: Honestly, I'm surprised your local Chevy Dealership can't do this job for you. They still work on cars there don't they? It is a Chevrolet isn't it? Just sayin'............... I bet you could get the parts yourself and take them to the dealership and one of the mechanics there could do the job for a few hours labor. Wouldn't hurt to talk to the service manager. Worth a shot, but you'd need to find a tech that's old enough to have the experience of working on stuff like that. At my local Chevy dealer, there are a few guys that fit that bill (they're also my friends too, though), but it's hit or miss. Some of the younger ones wouldn't even know what a carburetor looks like, lol. You also get this too.... (screenshot of the video they sent me). 1 Quote Link to comment Share on other sites More sharing options...
Dtret Posted May 16, 2023 Share Posted May 16, 2023 2 hours ago, jft69z said: Worth a shot, but you'd need to find a tech that's old enough to have the experience of working on stuff like that. At my local Chevy dealer, there are a few guys that fit that bill (they're also my friends too, though), but it's hit or miss. Some of the younger ones wouldn't even know what a carburetor looks like, lol. You also get this too.... (screenshot of the video they sent me). They were just trying to burp the cooling system. Air to the highest point. Lol. 4 Quote Link to comment Share on other sites More sharing options...
jft69z Posted May 16, 2023 Share Posted May 16, 2023 7 minutes ago, Dtret said: They were just trying to burp the cooling system. Air to the highest point. Lol. The guy didn't take into account that it was very back-heavy, with all the equipment they carry for EMS. 1 1 Quote Link to comment Share on other sites More sharing options...
Royals71 Posted May 16, 2023 Share Posted May 16, 2023 20 hours ago, GoGreen70MC said: @Royals71 I am only 30 miles from Canton, so not a bad drive at all for me. If you have any suggestions I would greatly appreciate it. Thanks. Conrad Warren Sheldon Mobil auto care (734)459-6366 Ford rd auto care (734)459-9800 Quote Link to comment Share on other sites More sharing options...
NavyCPO Posted May 17, 2023 Share Posted May 17, 2023 20 hours ago, jft69z said: Worth a shot, but you'd need to find a tech that's old enough to have the experience of working on stuff like that. At my local Chevy dealer, there are a few guys that fit that bill (they're also my friends too, though), but it's hit or miss. Some of the younger ones wouldn't even know what a carburetor looks like, lol. You also get this too.... (screenshot of the video they sent me). Oh My! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.