DragCat Posted January 27, 2023 Share Posted January 27, 2023 32 minutes ago, MC1of80 said: 2 are the light bulb wiring the other is the fiberoptic to the interior indicator. Learn something new every day 😁 1 Quote Link to comment Share on other sites More sharing options...
DragCat Posted January 28, 2023 Share Posted January 28, 2023 1 hour ago, jft69z said: Lol, there's 'Packard' in the middle of the pack there, Mark 😁 Good thing those have tops on them to prevent spillage 🤣 1 Quote Link to comment Share on other sites More sharing options...
Dtret Posted January 28, 2023 Author Share Posted January 28, 2023 4 hours ago, jft69z said: I have the Packard 56 terminal kits here if you just want to use factory type connections. Thanks Joe. I have what I need. 1 Quote Link to comment Share on other sites More sharing options...
jft69z Posted January 28, 2023 Share Posted January 28, 2023 3 minutes ago, Dtret said: Thanks Joe. I have what I need. I figured as much, but just in case.. Quote Link to comment Share on other sites More sharing options...
willie Posted January 28, 2023 Share Posted January 28, 2023 Joe i should say (you have too much time on your hands) But i will just say, you need to sleep much more!!!!! 👍😎👍 3 Quote Link to comment Share on other sites More sharing options...
jft69z Posted January 28, 2023 Share Posted January 28, 2023 7 minutes ago, willie said: Joe i should say (you have too much time on your hands) But i will just say, you need to sleep much more!!!!! 👍😎👍 I have been catching up on sleep, then there are times I'm up most of the night. 35 years of shift work will do that to you 🙃 4 Quote Link to comment Share on other sites More sharing options...
Dtret Posted February 4, 2023 Author Share Posted February 4, 2023 I got it to work correctly on the bench. If the video loads correctly it shows the correct colors at the end. It took a second to figure out the float. The light does go on and off as the wipers are turned on and off. IMG_4750.MOV 3 Quote Link to comment Share on other sites More sharing options...
Rob Peters Posted February 4, 2023 Share Posted February 4, 2023 1 hour ago, Dtret said: I got it to work correctly on the bench. If the video loads correctly it shows the correct colors at the end. It took a second to figure out the float. The light does go on and off as the wipers are turned on and off. IMG_4750.MOV Ya gotta love it when a plan comes together. Congrats Dennis. rob 1 Quote Link to comment Share on other sites More sharing options...
Dtret Posted February 5, 2023 Author Share Posted February 5, 2023 I put the proper connectors on the motor and wire also, so it looks factory. Much better than a blue scotch lock. 4 Quote Link to comment Share on other sites More sharing options...
Montemedic Posted February 5, 2023 Share Posted February 5, 2023 Whohoo ! And it works too !!! Quote Link to comment Share on other sites More sharing options...
overdrive Posted March 28, 2023 Share Posted March 28, 2023 The blue quick connector is also an indication of the factory installed system. The washer fluid monitor is included in the lighting convenience package. I ordered a new float for mine. The original is now a non-float. Dan 1 Quote Link to comment Share on other sites More sharing options...
Rob Peters Posted March 29, 2023 Share Posted March 29, 2023 10 hours ago, overdrive said: The blue quick connector is also an indication of the factory installed system. Dan Mine is original from the factory but all of the wiring goes directly into the plugs with none of the blue quick connectors. rob 2 Quote Link to comment Share on other sites More sharing options...
Grant MacPherson Posted March 29, 2023 Share Posted March 29, 2023 Mine shows the light group on the build sheet but had the blue clip. So, was it installed both at the factory and the dealership? When I was 17 (1969) I worked at a GM dealership where all new cars went through pre delivery where they were cleaned up and minor add-ons done. 1 Quote Link to comment Share on other sites More sharing options...
overdrive Posted April 1, 2023 Share Posted April 1, 2023 The blue connector is a factory installed part. Both methods to connect power were used. Dan 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.